|
|
Post by FlowRW on Mar 10, 2007 15:41:02 GMT -5
Looking for a set of headlights. Thought I would check here for Tom before him going to eBay where thay are $99 each. Anyone know where any are or where a wrecked PT might be?
|
|
|
|
Post by WE-B-CRUZN on Mar 10, 2007 16:51:04 GMT -5
I think Wayne Auto Salvage in Goldsboro
has two wrecked PT cruisers
(800) 672-5887 or 919-734-3958 or
e-mail parts@WayneAutoSalvage.com
|
|
|
|
Post by JamesP on Mar 10, 2007 19:47:00 GMT -5
Rick, Check with Anne aka Dizzydevil she just changed hers.I think she got them from CA but I don't remember the price.
James
|
|
|
|
Post by DizzyDevil on Mar 10, 2007 20:27:28 GMT -5
I got mine from Ebay, they are manufactured by a company called Eagle Lenses. I paid $185 for the set. Only issue I have is they are out of adjustment. I toook them in Friday to be adjusted and was told the adjustment screws were not doing anything. So it goes into the dealer on the 23rd to see if they can adjust them. Otherwise they may have to be replaced with Gen. dealer light assemblies. This was the folks though, www.am-autoparts.com |
|
|
|
Post by ROCKYMAN24 on Mar 12, 2007 23:06:03 GMT -5
oh no I just got a set from the same folks and am awaiting a day off to install them..........got theon ebay set for 159 + taxes and shipping 184 hope these work ok..
|
|
|
|
Post by DizzyDevil on Mar 13, 2007 18:43:53 GMT -5
I take it i on the 23rd so I'll let you all know. I did get a response from the place I bought them but they really didn't answer my question. (Whether anyone else has had an issue) they just stated that they are not returnable or refundable..... Because they can not guarantee they were installed correctly......  |
|
|
|
Post by DizzyDevil on Mar 26, 2007 12:25:42 GMT -5
Well I didn't post Friday but I took it to the dealer and they could not adjust them. They said that the cruiser headlights are very hard to adjust and that it may just need to be removed and re installed because of the mounting bracket. The tech that worked on it said that there was nothing wrong with the after market headlights I had purchased just that they seem to be not centered in the mounting bracket; who knew that Chrysler was so particular on the mounting.  Anyway I'll take it back in at my leisure. They told me it would pass inspection so I'm not worried about that anymore and I haven't been driving it as much now that we have a truck to kick around in. So be careful putting the new headlights in the mounting bracket. |
|
|
|
Post by ROCKYMAN24 on Mar 27, 2007 23:04:59 GMT -5
just put mine in today and still need to adjust them maybe tomorrow nite early.
|
|
|
|
Post by electricbluegt on Mar 28, 2007 7:39:12 GMT -5
Rocky, why did you replace your lights and what are you going to do with the old ones? Are they usable for some experimenting?
Brian
|
|
|
|
Post by ROCKYMAN24 on Mar 30, 2007 21:46:37 GMT -5
I have them not really doing much with them thought of refinishing them
|
|
Anyway I'll take it back in at my leisure. They told me it would pass inspection so I'm not worried about that anymore and I haven't been driving it as much now that we have a truck to kick around in. So be careful putting the new headlights in the mounting bracket. 
guess who