|
|
Post by ncptcruiser on Mar 14, 2008 8:42:47 GMT -5
Now Tim think about that a second, ITS FRANK almost everything he does is some shade of red . LOL J True...but I had to verify!   ;D |
|
|
|
Post by chromenut on Mar 18, 2008 9:28:27 GMT -5
FYI I've burned a soft copy of the '01-'04 and '06 Service Manuals to DVD and will bring them with me, along with my puter. Also I'll bring my scan tool in case anyone wants to play around with their OBD connection...
|
|
|
|
Post by JamesP on Mar 19, 2008 11:11:40 GMT -5
Just a reminder,Only about a week left till Tool Time,hope everyone is getting those project together.
James
|
|
|
|
Post by JamesP on Mar 24, 2008 6:31:13 GMT -5
The address for Golden Corral in High point is 1080 Mall Loop Rd High Point NC 27262. Now for all the people who have never been to Tool Time, Don't feel like you have to make the breakfast to be able to come,we have a strict policy come when you want and stay as long as you can.Your other option is to come directly to my house. The address is 2531 Old Mill Rd
High Point NC 27265, we should be there from breakfast around 10.Hope to see ya'll on the 30th
Just a reminder of the addresses for Tool Time this Sunday
|
|
|
|
Post by chromenut on Mar 24, 2008 7:25:41 GMT -5
Need to know what else to bring. Got much stuff, creeper, car stands, floor jack, dremel, lots of other stuff, just need to know what might be needed and I'll load it up that morning.
|
|
|
|
Post by JamesP on Mar 24, 2008 12:04:02 GMT -5
An extra creeper might be nice,besides that I thank we have it covered.Thanks for asking. You could bring a 12 pack of your favorite beverage (non acholic) LOL.
James
|
|
|
|
Post by chromenut on Mar 24, 2008 19:18:37 GMT -5
Isn't this the state where fountains pour forth with Cheerwine???
|
|
|
|
Post by ncptcruiser on Mar 25, 2008 4:12:36 GMT -5
Isn't this the state where fountains pour forth with Cheerwine??? I'll bring some Cheerwine if you can bring a decent orbital polisher/buffer, I need to use compound on a few problem areas on the "Beauty", plus I want to buff & shine up my diamond plate stuff |
|
|
|
Post by chromenut on Mar 25, 2008 8:03:00 GMT -5
I'll bring some Cheerwine if you can bring a decent orbital polisher/buffer, I need to use compound on a few problem areas on the "Beauty", plus I want to buff & shine up my diamond plate stuff I'll pull mine out, not sure but may need to grab a head for it... |
|
|
|
Post by chromenut on Mar 25, 2008 12:25:47 GMT -5
Okay, here's the short list of what I'll be bringing, so anyone can make use of these items while we're there: creeper, OBDII tool, plastic retaining clip removal tool, DVD with Service Manuals, Dremel Kit, bag'o'battery operated Hemi tools, orbital polisher, foam pads (makes sitting on the ground much more comfortable), and a bunch of hand tools. Does anyone need use of a heat gun? Or any other specialty tools that I might have??
Oh, yes, will bring my bucket'o'Cheerwine too!
|
|
|
|
Post by chromenut on Mar 28, 2008 22:35:36 GMT -5
Got everything set up and ready to go, see you all on Sunday. Looks like the weather is going to be lousy....
|
|
|
|
Post by Carrol Amerson on Mar 29, 2008 5:15:19 GMT -5
James, like Robin said, the weather is not looking good for Sunday. If it is nasty, I will not be cruising down to join you. We will just have to see what it looks like Sunday morning.
Carrol
|
|
|
|
Post by ncptcruiser on Mar 29, 2008 9:59:27 GMT -5
Yeah, too bad we couldn't have a day like yesterday to have Tool Time! Oh well...at least we won't be hot...wet maybe but definitely not hot!   ;D |
|
|
|
Post by chromenut on Mar 29, 2008 22:37:18 GMT -5
Ugh...just got back from the cruise to SC and the show in Marion... I think I'm going to sleep in and miss this tool time, I feel like crud and stayed out waaaayyyy too long in the cold today....
|
|
|
|
Post by Carrol Amerson on Mar 30, 2008 5:36:38 GMT -5
Sleeting and raining here this morning.....My little RD CRZR has asked not to be taken out of the garage today |
|
;D 
;D
guess who