|
|
Post by ncptcruiser on Mar 11, 2008 4:26:06 GMT -5
Just be willing to jump in & assist however you can with all the projects that are going on!  Hope to see you at a event this spring/summer! |
|
|
|
Post by JamesP on Mar 11, 2008 6:46:45 GMT -5
The address for Golden Corral in High point is 1080 Mall Loop Rd High Point NC 27262. Now for all the people who have never been to Tool Time, Don't feel like you have to make the breakfast to be able to come,we have a strict policy come when you want and stay as long as you can.Your other option is to come directly to my house. The address is 2531 Old Mill Rd
High Point NC 27265, we should be there from breakfast around 10.Hope to see ya'll on the 30th
James
|
|
|
|
Post by Carrol Amerson on Mar 11, 2008 9:23:57 GMT -5
James,
I am planning on riding or driving down as I did last time. I don't have any work to be done, but will certainly help with any project that I can. I may ride the motorcycle if the weather is good like I did before. Maybe Marcye will be able to join me this trip. I would be coming straight to your home and not make breakfast.
|
|
|
|
Post by JamesP on Mar 11, 2008 17:43:24 GMT -5
Great Carrol see you on the 30th. Anyone else from your group gonna make the trip down ? Hope they know by now that they're always welcome.
James
|
|
|
|
Post by chromenut on Mar 11, 2008 23:33:38 GMT -5
I'm not sure that I would be able to make this tool time but I was wondering something ..... If I were to make it to a tool time what would I need to bring.. other than any mods I had??? what I mean by this is I dont want to be a "tool" and not be able to help someone if someone is helping me. Let me know and in the mean time I'll try to get to a tool time !!!!! Brant I'm with Brant on this, going to try to make it but have the cruise and car show the night before over in Lenoir. I've got a dremel and all kinds of heads for it, and lots of other tools, anything special I should fit in the car before heading up there? I'm trying to figure out how to hook up a second horn. Bought a two-horn kit, but only the export models have two horns installed. I've already installed both, but need to figure out how to wire up the second. Any help there would be appreciated! I'm saving that piece for the tool time event, but it should (hopefully) be easy to do. The shop manual shows two horn connections off the Totally Integrated Power Module but I'm very leery about working around that sucker. I will bring soft copies of the '01-'04 and '06 Service Manuals in case we need to refer to them. Don't have hard copies, but will bring the laptop and CD's...also have the latest NHTSA investigations, recalls and TSB's for the PT too... |
|
|
|
Post by electricbluegt on Mar 12, 2008 15:14:03 GMT -5
I think the early PTs that had two horns simply had two connectors paralleled together on the harness. You can simply run a jumper between the two positive connectors on the new horns. The ground is usually just the bracket connected to the frame of the car.
Brian
|
|
|
|
Post by ptdc2 on Mar 12, 2008 15:19:04 GMT -5
We can check at the tool time..My pt came with 1 horn but had the plug for the other so i bit the bullet and bought other from dealership..
|
|
|
|
Post by PT4U2C on Mar 12, 2008 20:17:38 GMT -5
The'03's had only the low note horn; the connnection for the high note horn is there. Dealers can order the high note horn for about $30. Maybe higher now; been a while since I priced it.
PT4U2C
|
|
|
|
Post by FranksredPT on Mar 12, 2008 21:36:44 GMT -5
Hey Tim, I've got a brake caliper painting kit I'll sell you cheap. Bought it for mine but never got around to it. I'll bring it with me. We can knock out the sub woofer too. Not hard to do. John and I did his and Sandy's and I did mine by myself. Hell of a job doing it alone but with 2 people, its not so bad.
|
|
|
|
Post by JamesP on Mar 12, 2008 22:26:30 GMT -5
Frank
You better see if Brad or maybe Richard will let you borrow their PT for Tool Time. We're not gonna let some stinking rice burning YO YO come.LMAF
|
|
|
|
Post by Stoke on Mar 13, 2008 5:07:20 GMT -5
Ya'll be sure to get everything spiffed up, shined up and otherwise ready to go and be ready for Anne's show in April.... :-)
|
|
|
|
Post by ncptcruiser on Mar 13, 2008 8:47:46 GMT -5
Hey Tim, I've got a brake caliper painting kit I'll sell you cheap. Bought it for mine but never got around to it. I'll bring it with me. We can knock out the sub woofer too. Not hard to do. John and I did his and Sandy's and I did mine by myself. Hell of a job doing it alone but with 2 people, its not so bad. Frank, Bring it with ya...I'm assuming it's red, right? |
|
|
|
Post by JamesP on Mar 13, 2008 14:05:25 GMT -5
Now Tim think about that a second, ITS FRANK almost everything he does is some shade of red . LOL
J
|
|
|
|
Post by FranksredPT on Mar 13, 2008 21:22:16 GMT -5
Hey, I resemble that remark  Yep, the new one is a rice burner, but it don't burn much. Got 38.1mpg on the last tank. Yeah Tim, the paint is red. Brad will be out of town the weekend of AutoFair, so the PT will be mine. ;D What time we meeting for breakfast? |
|
|
|
Post by chromenut on Mar 13, 2008 22:19:23 GMT -5
Looks like I should be able to make this Tool Time. Please let me know if there is anything that I should bring - floor jack, creeper, stands, power tools, ramps, etc.  I'll be glad to pitch in on anybody's project needing help! I have all 9 fingers and 12 toes, so am somewhat handy... |
|
Yep, the new one is a rice burner, but it don't burn much. Got 38.1mpg on the last tank. 
I'll be glad to pitch in on anybody's project needing help! I have all 9 fingers and 12 toes, so am somewhat handy...
guess who